Pentium SQ578, Руководство пользователя

Страница: 33 / 57

SQ578
4-5
Drive
Type
How to Configure
SCSI Select Type . Select Not Installed in the drive parameter screen. The
SCSI drivers provided by the SCSI drive or SCSI host adapter
manufacturer should allow you to configure the SCSI drive.
IDE
Select Detect IDE from the AMIBIOS Setup main screen to let
AMIBIOS determine the parameters. AMIBIOS automatically
configures the correct IDE parameters for all IDE hard disk drives
attached to the primary and secondary IDE channels.
To manually set IDE drive parameters:
Select LBA/Large Mode . Select On if the drive has a capacity greater
than 540 MB.
Select
Block Mode . Select On to allow block mode data transfers.
Make sure the IDE drive supports block mode. Data may be destroyed
if block mode is selected but the IDE drive does not support block
mode.
Select 32-Bit Transfer . Select On to allow 32-bit data transfers.
Select the PIO Mode . It is best to select Auto to allow AMIBIOS to
determine the PIO mode. If you select a PIO mode that is not
supported by the IDE drive, the drive will not work properly. If you
are absolutely certain that you know the drive PIO mode, select PIO
mode 0 - 5, as appropriate.
CD-
ROM
Select Type . Select CDROM . Click on OK when AMIBIOS displays
the drive parameters.
Standar
d MFM
Drive
Select Type. You must know the drive parameters. Select the drive
type that exactly matches your drive parameters.
Non-
Standar
d MFM
Drive
Select Type. If the drive parameters do not match the drive parameters
listed for drive types 1 - 46, select User and enter the correct hard
disk drive parameters.
Entering Drive Parameters You can also enter the hard disk drive parameters. The
drive parameters are:
Parameter Description
Type The number for a drive with certain identification
parameters.
Cylinders The number of cylinders in the disk drive.
Heads The number of heads.