Pentium SQ578, Руководство пользователя

Страница: 43 / 57

SQ578
4-15
4.6.4 Hard Disk Power Down Mode
This option specifies the power conserving state that the hard disk drive enters after the
specified period of hard drive inactivity has expired. The settings contains Disabled,
Standby and Suspend. The default setting is Disabled.
4.6.5 Standby Time Out (Minute)
This option specifies the length of a period of system inactivity while in Full power on
state. When this length of time expires, the computer enters Standby power state. The
settings are Disabled, 1 minute, up to 14 minute, in increments of 1 minute. The
default setting is Disabled.
4.6.6 Suspend Time Out (Minute)
This option specifies the length of a period of system inactivity while in Standby state.
When this length of time expires, the computer enters Suspend power state. The
settings are Disabled, 1 minute, up to 14 minute, in increments of 1 minute. The
default setting is Disabled.
4.6.7 Display Activity
When set to Monitor, this option enable s event monitoring on the video display. If set
to Monitor and the computer is in a power saving state, AMIBIOS watches for display
activity. The computer enters the Full On state if and activity occurs. AMIBIOS reloads
the Standby and Suspend timeout timers if display activity occurs. The settings contains
Monitor and Ignore. The default setting is Ignore.
4.6.8 Wake Up Events In Doze & Standby
There are 2 settings, Enabled and Disabled, in each following items. Users can set
Enabled or Disabled in following items in order to reload saved settings after being
waked up.
§
IDE Adapter 0 Master/Slave
§
IDE Adapter 1 Master/Slave
§
Serial Port 1 Access
§
Serial Port 2 Access
§
Parallel Port Access
§
IRQ 1-15 and NMI Access
§
Keyboard Port Access
§
Ring Active