Pentium Third Serial Port Installation
2
CTC Parker Automation
Before You Start
Be sure you have the following tools:
•
Keyboard (If you have a P3 or P4 PowerStation, you will also
need a Y cable.)
•
Flat-head and Phillips screwdrivers
•
Needlenose pliers
8. Third COM Port Upgrade Kit (including the serial tang cable
assembly pictured below)
Open the PowerStation
In order to add a third serial port to the PowerStation, you must
open the unit.
Warning
For safety reasons, the PowerStation should be opened
only by qualified service personnel.
To open the PowerStation, complete the following steps:
1. Turn off the PowerStation.
2. Disconnect the unit from the power source.
3. Remove the PowerStation from its enclosure (if previously in-
stalled).
Consult your PowerStation User Guide if you need help with
this removal.
