Pentium Third Serial Port Installation
CTC Parker Automation
11
Reinstall the System Support Card
After you have reconfigured the System Support card and estab-
lished communication for COM2 on the CPU card, reinstall the
System Support card in the PowerStation.
To reinstall the System Support card, complete the following
steps:
1. Slide the System Support card back into its slot in the Power-
Station.
2. Reconnect the touchscreen and backlight cables to the System
Support card, as shown in the illustration below.
3. Reconnect the video cable and wide ribbon cable to the Sys-
tem Support card, as shown in the illustration below.
4. Attach the card to the PowerStation with the tang screw.
Video cable
Touchscreen
cable (P5)
Backlight
cable (P6)
Serial cable
Wide ribbon
cable
