Pentax Optio RX18, Руководство по эксплуатации, Страница: 208 / 260

206
7
Se
ttings
Pixel Mapping is a function for mapping out and correcting defective
pixels in the CCD sensor. Run the Pixel Mapping function if image dots
always seem to be defective in the same place.
1
Press the
3
button in
A
mode, and press the four-
way controller (
5
).
The [ W Setting] menu appears.
[Pixel Mapping] cannot be selected when the 3 button is pressed
in
Q
mode.
2
Use the four-way controller (
23
) to select [Pixel
Mapping].
3
Press the four-way controller ( 5 ).
The [Pixel Mapping] screen appears.
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card or built-in memory is
formatted. However the image is deleted if you change the start-up
screen after deleting the recorded image or formatting the memory.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when the camera starts up in the
playback mode.
• Movies or images taken at
F
(Digital Panorama) mode cannot be
used for the start-up screen.
Correcting Defective Pixels in the CCD Sensor
(Pixel Mapping)
Setting
Delete All
Pixel Mapping
Format
MENU Exit
3/3
Reset