Pentax MX-1, Руководство по эксплуатации

Страница: 95 / 244

93
2
Tak
ing Pi
ctures
4
Use the four-way controller (
45
) to select
O
(On) or
P
(Off).
The setting is saved.
When you choose [Select] for [Focusing Area], select a point from the 25
focusing areas.
1
Press the four-way controller (
5
) in
capture mode.
The screen for selecting Focusing Area is
displayed.
2
Use the four-way controller (
2345
) to select a
Focusing Area.
3
Press the 4 button.
The setting is saved and the shooting display is resumed.
If the
3 button is pressed in place of the 4 button, the Focus
Mode screen is displayed.
• Looking at the light directly does not pose a safety but you may feel
dazzled. Do not look directly into the emitter from a very short distance.
• The camera does not emit the Focus Assist light under the following
conditions:
- when the capture mode is set to
c
(Time-Lapse Movie),
C
(Movie)
or
d
(High Speed Movie) mode
- when s (Infinity),
3
(Pan Focus) or \ (Manual Focus) is
selected as the focus mode
• The default setting in
e
(Pet) mode and
Y
(Candid Capture) mode
is
P
(Off).
To Select the Focusing Point (Select)
• The Focusing Area selection is allowed only when the focus mode is
= (Standard),
q
(Macro) or
I
(1cm Macro)
• The Focusing Area setting is common to = (Standard),
q
(Macro)
and
I
(1cm Macro).
OK