Pentax EI-200, Руководство по эксплуатации, Страница: 32 / 142

30
◆
Display panel and flash mode setting
When the flash mode button is pressed a flash setting
symbol will be displayed on the LCD panel.
The flash setting symbol and the flash conditions are as
described in the following
Taking pictures using self-timer or remote control (a remote control is optional)
The following section described the operation of the self-timer and the included wireless remote
control for when taking pictures of the whole family using a tripod etc.
q
Check that the battery and memory card are installed.
w
Fix camera to the tripod etc.
e
Turn on the power switch and turn the mode dial to the
capture mode symbol.
1
Getting the camera ready
No. of times flash mode
Symbol on LCD panel Flash mode
button is pressed
0 No display
Automatic flash.
Flash goes off as required.
1
Red-eye reduction.
Before the main flash goes off, a number of small flashes are
emitted, to reduce the phenomenon where people’s eyes appear
red (red-eye reduction).
2
Daylight-sync mode.
The flash is forced to go off even if it is bright or back light condition.
3
Red-eye reduction and Daylight-sync mode.
The flash is forced to go off and Red-eye reduction is in effect
when the flash goes off.
4
Slow-shutter-speed mode.
The flash does no go off. This mode is set when taking pictures
where flash photography is prohibited or taking pictures at night.
5
Slow-speed-sync (Flash-on) & Daylight sync mode.
Set when it is desired to take properly exposed pictures of both
people and a background when taking pictures at night.
6
Red-eye reduction, slow-speed-sync (Flash-on) and Daylight sync mode.
Red-eye reduction when flash goes off when taking pictures with
the slow-speed sync mode.