Pentax EI-200, Руководство по эксплуатации, Страница: 30 / 142

28
Handling of the Memory Card
¡ Note that a memory card, if taken out, may be hot immediately after taking pictures.
¡ Never eject a memory card or turn off the power during the data storage process or
communicating with another device. It would cause damage data or the card.
¡ Do not bend a memory card or subject it to a strong shock; do not expose it to the water nor
leave it at a place of high temperature.
¡
Be sure to format, before using, an unused memory card or a card used on another camera
( p.74).
¡
Never attempt to eject a memory card while it is being formatted. If you do so, the card
would be fatally damaged.
¡
It is possible for data stored in the memory card to be erased under the following condi-
tions, so please take care. Please be aware that Pentax bears absolutely no responsibility for
erased data.
• Mishandling of the memory card by the user.
• Memory card located at a place susceptible to static electricity or electrical noise.
• Card not used for a long period of time.
• Card ejected or power supply disconnected while the card access lamp is blinking.
¡
The memory card has a limited lifespan. The stored data may become corrupted if the
memory card is not used for a long period of time. Ensure that necessary data is backed up
to a personal computer etc. on a regular basis.
¡ Avoid using or storing in places where static electricity or electrical noise is likely to occur.
¡
Do not subject the card to bending, dropping or strong impacts.
¡
Avoid using or storing in places where there are sudden temperature variations or conden-
sation, or in direct sunlight.
Card Access Lamp