alarm will ring again the next day.
If you choose “Snooze On”, the alarm will ring in regular intervals approx.
every 10 minutes till the batteries of the handset are empty. By pressing any
key (not the
key) you can switch off the alarm at any time, after 10
minutes the alarm will ring again. To switch off the alarm, press the
key.
The alarm will ring again the next day. To deactivate the alarm, choose “Off”
in the “Alarm” menu, as described above.
Factory default: Off
You can adjust the volume of the handset or the speaker when using the
hands-free function as follows:
Factory default: Volume 3 for both
You can choose the ring tone for incoming calls from the telephone network
(RING EXT) as well as the ring tone from the door unit or other handsets
registered at the same base (RING INT) and adjust its volume.
Use
or
key to select “INT Ring” or “EXT Ring”.
Press the “Select”
key.
Use
or
key to select “Melody” or “Volume”.
Use
or
key to select a ring tone from melody 1 to 10 or adjust
the volume from 1 to 5 or switch it off completely (”Volume Off”). When
setting the ring tone or the volume, the telephone will sound the selected
melody or ring with the chosen volume.
Press the “Save”
key to confirm.
Factory default:
22.2 Adjusting the volume (Audio Setup)
22.3 Ring tone (melody and volume) (Ring Setup)
!
!
!
!
!
!
Use
and
key to select “HS Settings”.
Press the
key.
Use
and
key to select “Audio Setup”.
Press the
key.
Press the
key.
Use
and
key to select “HS Settings”.
Press the
key.
Use
and
key to select “Ring Setup”.
Press the
key.
Press the “Select”
key.
EXT Ring: Melody 1
INT Ring: Melody 8 / Volume 3 for both
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Press the “Menu”
key.
“Select”
"Alarm" appears.
“Select”
“Select”
Press the “Menu”
key.
“Select”
"Alarm" appears.
“Select”
Use
or
key to select “Speaker V.” or “Earpiece V.”.
The display shows the current setting.
Use
or
key to select the volume level from “Volume 1” to
“Volume 5”.
Press the “Save”
key
22.4 Setting key tones (Tone Setup)
22.5 Selecting a language on the display (Language)
!
!
!
!
!
!
Use
and
key to select “HS Settings”.
Press the
key.
Use
and
key to select “Tone Setup”.
Press the
key.
Use
and
key to select “Key Tone” or “Range Alarm”.
Press the
key again. The display shows the current setting.
French,
Spanish,
Italian, Dutch, Russian, Polish
Use
and
key to select “HS Settings”.
Press the
key.
Use
and
key to select “Language”.
Press the
key.
!
!
!
!
!
!
!
!
Use
or
key to select “On” or “Off”, to enable or disable the
function.
Press the “Save”
key.
For normal use, we recommend you leave the key tones enabled. This
makes the phone easier to use.
Factory default: for both: On
The handset supports several predefined languages: English,
German,
. You can change the
language of the display texts as follows:
The display shows the current setting.
Use
or
key to select a language. Each language is displayed
in its translation.
Press the “Save”
key. You will hear a confirmation beep.
Factory default:
indicates the order in which the device has
been registered to the base. The name is displayed in standby mode.
Notes:
Key Tone
Reception range
Each depression of a key can be confirmed by the handset with a tone. This
tone can be tuned off.
The handset issues a warning sound when it is outside the reception range of
the base. This sound
German
The default name of the supplied components is HS 1 (handset) and HS 2
(door unit). The default name of a handset or a door unit after registration is
"HS N". The number N = 1 to 5
Each handset can be named for easier identification:
can be tuned off.
22.6 Handset name ( HS Name)
!
!
!
!
Press the “Menu”
key.
“Select”
"Alarm" appears.
“Select”
Press the “Menu”
key.
“Select”
"Alarm" appears.
“Select”
In certain conditions, a warning tone will sound when an incorrect key is
pressed. This warning tone cannot be disabled in “Range Alarm”.
GB - 50
