!
Press the “Menu”
key.
“Select”
"Terminate HS" appears.
“Select”
Press the “Menu”
key.
“Select”
"Terminate HS" appears.
“Select”
Press the “Menu”
key.
“Select”
"Terminate HS" appears.
“Select”
The display shows the current setting.
“Select”
If you select the current handset
or a nonexistent handset, a warning tone will be heard. After a few
seconds, the selected handset will not be registered any more.
This setting is only necessary if required by your telephone system. See user
manual of the telephone system.
You can select to change the dialling mode by the following steps:
The display shows the actual setting.
“Save”
A confirm beep will be heard.
This setting is only necessary if required by your telephone system. See the
user manual of the telephone system.
You can change the Flash time with the following steps:
Use
or
key to select “Flash-1” (short) or “Flash-2” (long).
Press the “Save”
key.
This function allows you to change the PIN number of the currently active
base. The default PIN is 0000.
!
!
!
!
!
!
!
!
!
!
!
!
!
Use
and
key to select “BS Settings”.
Press the
key.
Press the
key.
Use
and
key to select “BS Settings”.
Press the
key.
Use
and
key to select “Dial Mode”.
Press the
key.
Use
and
key to select “BS Settings”.
Press the
key.
Use
and
key to select “Flash Time”.
Press the
key.
The display shows "PIN ?".
Enter the current PIN code (the default PIN code is "0000").
Press the “OK”
key.
Use
or
key to select a handset.
Press the
key to confirm.
Use
and
key to select the desired dialling mode (Tone or
Pulse).
Press the
key.
If you are not sure which dialling mode to select, please contact your local
service provider.
Factory default: Tone
Factory default: Flash-1
!
!
!
!
!
!
!
!
21.2 Dialling mode (Dial Mode)
21.3 Flash Time
21.4 Modifying the PIN (Modify PIN)
Note:
!
!
!
!
!
!
!
!
!
!
!
!
Use
and
key to select “BS Settings”.
Press the
key.
Use
and
key to select “Modify PIN”.
Press the
key.
Use
and
key to select “BS Settings”.
Press the
key.
Use
and
key to select “Flash Time”.
Press the
key.
Use
and
key to select “HS Settings”.
Press the
key.
Press the
key.
!
!
!
!
!
!
!
!
!
!
!
#
#
#
#
Note:
Notes:
It is important that you memorize your new PIN.
If you loose your
PIN, you cannot make any modifications to the device which require a PIN.
If you choose “Snooze Off”, the alarm will ring for about 40 seconds at the
selected time. By pressing any key you can switch off the alarm at any time.
To deactivate the alarm, choose “Off” in the “Alarm” menu, otherwise the
21.5 Resetting the base (BS Reset)
22.1 Alarm
22. Handset settings (HS Settings)
Press the “Menu”
key.
“Select”
"Terminate HS" appears.
“Select”
Press the “Next”
key. The display shows "Repeat".
Press the “Menu”
key.
“Select”
"Terminate HS" appears.
“Select”
Press the “Menu”
key.
“Select”
"Alarm" appears.
“Select”
The display shows the current setting.
!
!
The display shows "PIN ?".
Enter the current PIN.
Press the “Next”
key. The display shows "New PIN".
Enter a 4-digit new PIN.
Enter the new PIN again.
Press the “Save”
key to confirm. Now your new PIN is activated.
This function allows you to reset the base setting to the factory default.
The display shows "PIN?".
Enter the current PIN code.
press the ”Reset”
key.
You are able to set the alarm on the handset.
Use
or
key to select “On” or “Off”.
Press the “Select”
key.
If you select ON, the display shows the current alarm time.
Enter the new time with numeric keys 0 to 9 in 24h format HH:MM.
Press the “Next”
key. A beep sounds.
Press
or
key to enable or disable the snooze function
Press the “Save”
key.
GB - 49
