Pentair STA-RITE Cristal-Flo PA15-BR462, Инструкция по установке и эксплуатации

Страница: 8 / 36

- Onga ECO-Line -
Page
8
GENERAL INFORMATION
The pump-series BR400E is designed
especially for residential swimming
pools. The pumps are self priming
with a good performance. Features
include 4” trap with 3/4” drain plug
and 50mm adjustable inlet and outlet
unions (female slip), and see through
trap lid.
Motor: The strong motors are bu-
ilt to VDE standards and meet the CE
standards with the motor classifica-
tion IP55.
Electrical: 240 volt single phase
are supplied as standard with built-in
thermal overload protection.
The special mechanical seal was
specifically designed for this type of
pump.
The bearings are hermetically se-
aled and permanently lubricated.
The capacitor is interchangeable,
fitted inside the terminal housing and
protected against the environment.
The pumps are delivered with
cord and plug (0.25kW to 0.75kW sin-
gle phase).
The BR400E (BR462E, BR463E, BR464E,
BR465E) series pumps have been de-
signed in compliance with standards:
IEC-335-1, EN 60335-2-41, CEI 61-69.
INSTALLATION
WARNING
Have the pump connected by a licen-
sed electrician according to the natio-
nal standards.
WARNING
This appliance must be earthed.
Have adequate floor drainage to
prevent flooding.
Self Priming Pump For
Swimming Pools With Built-In
Prefilter. Protection Rating IP55
1) Discharge outlet
2) Filter cover
3) Suction inlet
4) Drain plug
Brown
Blue
Black
Page
8