Pentair Riversoft, Руководство по установке

Страница: 32 / 90

Installer Manual Riversoft - Installation
32 / 90 Ref. MKT-IM-045 / A - 13.03.2020
F Make necessary piping changes for connecting the softener inlet and outlet to the home piping.
Make sure not to reverse inlet and outlet.
G Installation of supplied bypass is mandatory, see 4.5.2. Installation layout, page 29.
H Connect the inlet and outlet piping, see 4.5.6.1 Water supply line, page 33.
NOTE

The valve connection threads are ¾" BSPT male.

MANDATORY

Make sure having the incoming water connected to the left side (looking from the front of
the softener).
MANDATORY

Do not use pipe joint compound or plumber’s putty on the valve body threads. Use only
Teflon
®
tape.
MANDATORY

Do not over-tighten fitting.
I Make certain proper piping alignment is maintained. Do not apply heat to any fitting connected to
the softener or damage to the valve may occur.
J Move the softener in position and level.
TIP

To prevent water leaks, connections to the softener must be straight when the softener is
levelled.
K Carefully connect the valve drain line at the back of the softener, see 4.6.1. Drain line connection,
page 39.
L Connect salt storage tank overflow elbow to drain, see 4.6.3. Overflow line connection, page 41.
CAUTION

Do not connect valve drain line and overflow drain line together by teeing.