Level I Programming – P Values
Pressing the SET key will enter the change mode at “Time
of Day”. The change mode will be entered at the displayed
parameter if the control is in data mode when the SET key
is pressed. The displayed parameter will flash. Pressing
the Up or Down key will change the flashing value of the
parameter. Holding the UP or DOWN key will scroll the
flashing parameter value. Pressing the SET key again will
enter the flashing value in the appropriate parameter and
advance to the next parameter.
P#
Description
Range
Minimum
Increments
Default
Units
Notes
P1
Time of Day
1:00 - 12:59
AM or PM
00:00 - 23:59
1 Min
12:00 PM
Hr./Min.
Range dependent on value selected
for P10. Clock mode.
P2
Day of Week
N/A
1 Day
None
N/A
Uses arrows under days of week on
overlay.
P3
Time of Regen
1:00 - 12:59
AM or PM
00:00 - 23:59
1 Min
2:00 AM
Hr./Min.
Range dependent on value selected
for P10. Clock mode.
P4
Calendar Override
0 - 99
1
3
Days
0 = No calendar override.
0.5 = Regeneration twice a day at time
of regeneration and 12 hours later.
Calendar Override skipped if at least
one Day of Regeneration selected.
Can be locked out of changes in Level
I Programming.
P5
Day of Week
Regeneration
N/A
1 Day
None
N/A
Uses bars under days of week on
overlay. Day of Week Regeneration is
skipped if calendar override is more
than zero.
P6
Salt Setting
3-18
50-290
1
10
9
110
Lbs/Cu ft
3
g/L
Unit of measure depends on value in
P9. Units of Measure.
P7
Capacity of Unit
(Demand Only)
1 - 900
0.1 - 90.0
1
0.1
(1)
Kilograins
Kilograms
Unit of measure depends on value in
P9. Units of Measure.
P8
Hardness of Water
3 - 200
30 - 2000
1
10
25
250
Grains per
Gallon
Milligrams
per liter
Unit of measure depends on value
selected for P9. Units of Measure.
Notes: (1) Calculated depending on salt setting and resin volume.
20 •
PENTAIR
Pro Elite Professional Series Pro Elite Demand Instruction Manual
