DANGER -
SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS LIGHT IS NOT
INSTALLED AND USED CORRECTLY.
DANGER -
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST READ THESE WARNINGS AND ALL
INSTRUCTIONS BEFORE USING THE POOL AND/OR SPA LIGHT.
The light should be positioned so that prolonged staring into the luminaire at a distance closer
than 0.51m is not expected.
Do not stare at the operating light source.
WARNING -
Most states and local codes regulate the construction, installation, and operation of public pools
and spas, and the construction of residential pools and spas. It is important to comply with these codes,
many of which directly regulate the installation and use of this product. Consult your local building and
health codes for more information.
IMPORTANT NOTICE - Attention Installer:
This Installation and User’s Guide (“Guide”) contains important
information about the installation, operation and safe use of this underwater pool and spa light. This Guide
should be given to the owner and/or operator of this equipment.
Before installing this product, read and follow all warning notices and instructions in this Guide. Failure to
follow warnings and instructions can result in severe injury, death, or property damage.
Please refer to www.pentairpooleurope.com for more information related to this products.
DANGER - RISK OF ELECTRICAL SHOCK OR ELECTROCUTION: UNDERWATER POOL LIGHTS REQUIRE HIGH
VOLTAGE WHICH CAN SHOCK, BURN, OR CAUSE DEATH.
Before working or servicing pool lights, always
disconnect power to the pool and/or spa lights at the source circuit breaker. Failure to do so could result
in death or serious injury to service person, pool users or others due to electric shock. When installing and
using this electrical equipment, basic safety precautions should always be followed.
ELECTRICAL WIRING RULES :
This product must be installed by a licensed or certified electrician or a
qualified pool professional in accordance with the local regulation depending country :
A = ÔVE 8001-4-702
CZ = CSN 33 2000 7-702
D =
OIN VDE 0100-702
E = UNE 20460-7-702 1993, RECBT ITC-BT-31 2002
EW = EVHS-HD 384-7-702
F = NF C15-100
GB = 6S7671:1992
H = MSZ 2364-702/1994/MSZ 10-553 1/1990
I = CEi 64-8/7
IRL = Wiring Rules + IS HD 384-7-702
LUX = 384-7.702 S2
M =MSA HD 384-7-702.S2
NL = NEN 1010-7-702
P = RSIUEE
PL = PN-IEC 60364-7-702:1999
SK = STN 33 2000-7-702
SLO = SIST HD 384-7-702.S2
TR = TS IEC 60364-7-702
All applicable local installation codes and ordinances must also be adhered to. Improper installation will
create an electrical hazard which could result in death or serious injury to pool users, installers or others
due to electrical shock, and may also cause damage to power source. Always disconnect the power to the
pool light at the circuit breaker before installing or removing the light. Failure to do so could result in death
or serious injury.
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
1
