WARNING -
For countries in compliance with International Electrotechnical Commission (IEC) regulatory
standards: The light fixture must be installed by a licensed or certified electrician or a qualified pool service
person, in accordance with current IEC 364-7-702 and all applicable local codes and ordinance. Improper in-
stallation will create an electrical hazard, which could result in death or serious injury to pool user, installer
or other due to electrical shock and may also cause damage to the property.
WARNING -
This product is intended for use in swimming pool applications only.
POOL AND SPA FIXED LUMINARIES -
Follow these guidelines when installing or replacing Pentair Water Pool
and Spa fixed luminaries.
FOR LIGHT OPERATION, ONLY USE A SAFETY ISOLATION TRANSFORMER COMPLIANT WITH NF EN 61558-2-6.
Note: Connect both wires to the corresponding circuit wires in the junction box (brown wire to power, and
blue wire to common) FIXED POOL AND SPA LUMINARIES SPECIFICATION: 12 VAC 50/60 Hz.
- IMPORTANT NOTICE -
THE MICROBRITE LIGHT IS A NON-SERVICEABLE LIGHT. THE COMPLETE LIGHT ASSEM-
BLY MUST BE REPLACED.
- CAUTION -
DO NOT INSTALL MICROBRITE LIGHTS WITH DIMMER SWITCHES. USE OF DIMMER SWITCHES WILL
RESULT IN PERMANENT DAMAGE TO THE LIGHT.
- WARNING -
Connect the device to a differential interrupter. If this system is used to control the underwater
lighting devices, a differential interrupter must be installed upstream of these devices. Conductors down-
stream of the differential interrupter shall not be located in ducts, junction boxes or enclosures containing
other conductors, except if the conductors are also protected by a differential interrupter. Refer to valid
local codes for more details.
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
2
