Assembly Instructions
ITEM NO.:
31633
1. Thread the LOOP (A) onto the NIPPLE (B). Until tighten!
2. Unfold the arms to the correct place to match the FRAME (I).
3. Thread the NIPPLE (H) onto COUPLEN (G). Until tighten!
4. Place the FRAME (I) onto the fixture careful. Make sure all of the NIPPLE (H)
hade insert the tubings on the FRAME (I).
5. Place the COVER (J) onto the FRAME (I). Then secured by the BALL NUT (K).
6. Measure the height from hanging fixture to your ceiling. Cut the excess chain
and wire to fit the height.
7. Follow the wattage label on the glass hold and install correct wattage and type
bulb (no provide) onto the socket.
8. For mounting and wiring step please follow the mounting instruction sheet
enclosed.
