3
‘LIL REBEL™ Aboveground Suction-Side Pool Cleaner Installation and User’s Guide
‘LIL REBEL™ Aboveground Suction-Side Pool Cleaner Installation and User’s Guide
Standard Installation
The ‘Lil Rebel™ Aboveground Suction-Side Pool Cleaner is
designed to work in a wide variety of swimming pools. The standard
in-skimmer installation is covered in this section.
1. Turn the pool pump off.
2. Close the main drain and all suction lines, except the line from
the skimmer to which the cleaner will be connected.
3. Remove skimmer basket.
4. Install the reducer cone into the vacuum connection in the
bottom of the skimmer. See
Figure 7
.
5. Press the regulator valve into the compression adapter. The
valve’s adjustment knob should be pointing up. See
Figure 6
.
6. Place cleaner into the pool. Turn it side to side and front to back
to release any trapped air, allowing the cleaner to sink to the
floor of the pool. Continue to feed the hose vertically down into
the pool until it is completely filled with water and purged of air.
Note:
If air is pulled into the pool plumbing it may
cause your pump to lose prime.
7. Insert the end of the hose through the skimmer
opening and connect the hose directly into the
regulator valve. See
Figure 7
.
INSTALLING THE CLEANER
Figure 6
Attach Hose This End
Regulator
Valve
Press into
bottom of skimmer
Reducer
Cone
32” Female/
Male Hose
Attach
Hose
This End
Top of Skimmer
Hose through
Skimmer
Opening
Regulator
Valve
Reducer
Cone
To Pump
Figure 7
Содержание Lil Rebel
Страница 15: ...NOTES ...