LEGEND
®
INSTALLATION MANUAL
II. Installation Instructions
A. Legend
®
Components
The Legend
®
Box Contains:
1. Cleaner Head
2. Sand & Silt Bag
3. Sweep Hose (Attached to Cleaner Head)
4. Complete Feed Hose
a. 1 - 8½” (22 cm) hose
b. 2 - 10’ (3 m) white (hard) hoses
c. 1 - 30” (75 cm) soft hose / 1 - 7.5’ (2,3 m) soft hose
d. 10 - Floats
e. 3 - Swivels
f.
1 - Back-up Valve
g. 10 - Mender Nuts
h. 1 - Wall Fitting Complete
B. Pool Connections
The Legend
®
comes equipped to connect to a female
threaded 1-1/2" (38mm) line, dedicated to our Universal
Booster Pump.
Also, if the pool doesn't have a dedicated cleaner line,
please contact our Technical Support Department at
1-800-831-7133 [USA] or {Herentals – Belgium
+32 (0) 14.25.99.11}.
C. Booster Pump Installation
If you already have a 3/4 horsepower
booster pump installed at your equipment
pad and it is operational, skip this section
and proceed to Installing the Twist Lock
Pressure Relief Valve (Wall Fitting).
Detailed booster pump installation
instructions are packaged separately in
our booster pump box.
Please follow these instructions
carefully.
The booster pump is not self-priming and
needs to be fed with water taken from
the pool filter before any type of in-line
chlorinator.
C
D
G
B
G
C
B
D
E
B
A
E
D
B
H
D
F
2
3
8
[English]
1
FROM
POOL
FILTER
PUMP
POOL
FILTER
HEATER
SOLAR
SYSTEM
CHLORINATOR
TO
POOL
BOOSTER PUMP
