![background image](http://html1.mh-extra.com/html/pentair/colorvision/colorvision_installation-and-user-manual_1524886016.webp)
COLORVISION Light Installation and User’s Guide
12
8.
Install the diffuser ring (white ring with many small holes), into the niche; concave
side up, as shown below.
GloBrite Light Installation/Removal Tool
Align and insert tool pins with holes
in front oF light
Rotate handle 1/8
turn clockwise to
install or counter-
clockwise 1/8 turn
to remove
Light installation
and remove tool
6. Install the new GloBrite
®
light assembly: Push the light into the niche
while pulling the power cord from the junction box or transformer. Be sure the
locking tabs in the back end of the light are properly aligned with the niche
openings (inside the niche).
7.
Place the light installation tool (P/N 620057) over the front of the light. Turn the
tool and light clockwise (less than 1/8th. turn), while pushing inward, until you
feel the stop point. This indicates the light is properly seated, locked and the
niche is completely sealed. Note: If the light does not turn smoothly, pull the
light slightly out and make sure that it’s seated properly and the niche is free
of debris, then install the light as described in step 6.
Diffuser Ring
Niche
Diffuser Ring
installed
into niche
Note: This task requires two persons:
One person to push the GloBrite into
the niche, and the other person to pull
light’s power cable through the conduit
from the junction box or transformer.