Pentair COLORVISION Скачать руководство пользователя страница 40

Страница: 40 / 40

COLORVISION Light Installation and User’s Guide

1620 HAWKINS AVE., SANFORD, NC 27330 • (919) 566-8000

10951 WEST LOS ANGELES AVE., MOORPARK, CA 93021 • (805) 553-5000

WWW.PENTAIRPOOL.COM
All Pentair trademarks and logos are owned by Pentair or one of its global affiliates. Pentair Aquatic Systems

, ColorVision

™

IntelliBrite

, EasyTouch

, GloBrite

, IntelliTouch

, and SunTouch

are trademarks and/or registered trademarks of Pentair

Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/ or other countries. Unless expressly noted,

names and brands of third parties that may be used in this document are not used to indicate an affiliation or endorsement

between the owners of these names and brands and Pentair Water Pool and Spa, Inc. Those names and brands may be

the trademarks or registered trademarks of those third parties. Because we are continuously improving our products and

services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.
© 2016 Pentair Water Pool and Spa, Inc. All rights reserved. This document is subject to change without notice

P/N 590125 REV. A 6/2016

*590125*

Содержание COLORVISION









































Результаты поиска

Содержание COLORVISION

Отзывы:

Бренды по названию

Популярные бренды

Pentair COLORVISION, Инструкция по установке и эксплуатации

Результаты поиска

Содержание COLORVISION

Отзывы:

Бренды по названию

Популярные бренды