manualshive.com logo in svg

Pentair 522352, Руководство по установке

Поделиться
Скачать
Pentair 522352 Скачать руководство пользователя страница 37

 

EASYTOUCH

® 

PL4/PSL4 Control System Installation Guide 

 

                                                                                                                    

EASYTOUCH

® 

PL4/PSL4 Control System Installation 

                                                                                                                                                                                            29

 

Installing the EasyTouch

®

 PL4/PSL4 Control System Outdoor 

Control Panel 

(Continued)

To install the Outdoor Control Panel:

1.  Unlatch the front door spring latch and open the front door of the Power Center enclosure.

2.  Remove the two (2) retaining screws securing the high voltage cover-panel. Remove the 

HIGH VOLTAGE COVER PANEL from the enclosure. 

3.  Remove the Outdoor Control Panel from its packaging.

4.  Mount the Outdoor Control Panel in the top part of the Power Center. Secure the lower 

edge of the control panel with the two retaining screws. Once secured, the Control Panel 
can hinge out and down to access the circuiy board low voltage connections.

5.  When finished connecting the low voltage connections on the circuit board, close the 

hinged control panel and secure it with the two retaining screws.

6.  Install the cover-panel and secure it with the two retaining screws. 
7.  Close the front door of the Power Center and fasten the spring latch.

EasyTouch PL4/PSL4 Control System 

Power Center (front view)

High Voltage 
Front Panel 
Cover retaining 
screws

HIGH VOLTAGE FRONT 
COVER PANEL

Low voltage 

Raceway

Outdoor  
Control Panel 
(fold down to  
access circuit board 
and low voltage 

Retaining 

screw

Retaining 
screw

EasyTouch PL4/PSL4 Control System Power Center (front view)

(front door and high voltage compartment panel removed)

Retaining screw 

(Outdoor 

Control Panel)

Содержание 522352

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды