PENTAGON DefendaGuard, Ручное управление

Страница: 18 / 28

16 THREE: INSTALL CURTAIN
3
H. Using the charging handles, carefully
rotate the axle (E) the opposite way,
until you feel the spring tension
transfer onto the curtain. Remove
the charging handles and allow
the curtain to coil up into the box
housing (A).
I. Install the auto-lock brackets (L) onto
each side of the box housing (A). Ensure
the shutter is in the closed position.
When the shutter is in the closed
positon, continue operating the shutter
downwards allowing the axle (E) to turn
until the t-clips (H) push the top of the
curtain against the back of the box
housing.
Mount the auto-lock brackets 3/8”
(10mm) above the top of the curtain
and in between the two straps closest
to the ends of the box housing (one on
each end of the box housing).
*The top of the box housing is not
shown for illustration purposes.
Use the tek screws (J2) provided for
mounting.
SKIP THIS STEP IF YOUR AXLE DOES NOT HAVE SPRING ASSIST (NO LABEL)