PENTAGON DefendaGuard, Ручное управление

Страница: 17 / 28

15 THREE: INSTALL CURTAIN
3
F. Before attaching the curtain to the
axle (E) you must tension the axle
spring by turning it with the charging
handles provided.
The location to insert charging
handles, the direction to turn the
axle, and the number of turns to turn
the axle is displayed on a label on the
axle.
Insert the charging handles into the
axle and turn the axle, to put tension
on the spring.
Use both handles to rotate the axle.
Once the first one reaches the top,
insert the second one into the next
hole and continue turning the axle
until the number of turns displayed
on the label have been completed.
SKIP THIS STEP IF YOUR AXLE DOES NOT HAVE SPRING ASSIST (NO LABEL)
If your axle has a label displaying tension instructions and the location of the
winding wheel, then your axle has spring assist.
G. Attach the t-clips (H) onto the axle
(E) by squeezing the arrow-shaped
ends, and inserting them into the long
narrow slots in the axle.
Ensure all of the t-clips are inserted
into the same row of slots in the axle.