PENTAGON DefendaGuard, Ручное управление

Страница: 12 / 28

10 TWO: MOUNTING
2
SKIP THIS STEP IF YOUR CURTAIN IS NOT PRE-INSTALLED IN BOX HOUSING
10. Carefully uncoil the curtain down
into the guide rails (C) until it is in the
closed position.
Important note:
Ensure the box housing (A) is firmly
supported to avoid breaking the box
housing legs.
Remove the protective foam
wrapping on the curtain.
If your shutter has support plates:
Large shutters have steel support
plates on each end of the box housing.
Insert the #10 - 2” screws (J1)
through the 4 mounting holes on each
plate, into solid backing.
11. Mount the box housing (A) to solid
backing with a screw at each end, and
one screw every 16” across the width.
Use the #10 - 2” screws (J1). Insert
the screws through the top of the box
housing.
To operate the shutter, pull the tape
in the upwards direction so that the
tape goes into the box housing (A).
To open the shutter, pull the tape out
of the box housing and down to the
tape coiler.