PENTAGON DefendaGuard, Ручное управление

Страница: 15 / 28

13 THREE: INSTALL CURTAIN
3 INSTALL CURTAIN
SKIP THIS STAGE IF YOUR CURTAIN IS PRE-INSTALLED IN THE BOX HOUSING
C. Lift the curtain into the box housing
(A), feed it over top of the axle (E),
and carefully uncoil the curtain down
into the guide rails (C) until it is in the
closed position and the bottom bar (D)
is at the bottom.
Ensure the curtain does not get
scratched or damaged when uncoiling
it into the guide rails.
Warning:
The curtain can be heavy. Ensure you
have enough assistance to lift and hold
the curtain, or use a lifting device.
There are two curtain installation options. Option 1 is the easiest and most convenient
for curtains that are not too heavy. Option 2 is for larger shutters (skip to page 17).
OPTION #1
A. Remove the protective foam wrapping
around the curtain roll (B).
Unwrap the curtain roll and rewrap it
the opposite way so the bottom bar (D)
is on the outside of the curtain roll.
B. Wrap the axle (E) in the box housing (A)
with soft protective material, to avoid
damaging the curtain during the next
step.
Warning:
Bending the curtain backwards will cause damage (not covered by warranty).