10
Inspect the product for damage. Do not use if damaged.
Call Ameda CustomerCare at 1.877.99.AMEDA (26332).
6. OPERATING INSTRUCTIONS
1. Flip the power switch into the on position.
2. Press On/Off Button to begin.
3. Scroll to the warming mode of interest:
a.
Room Temperature/Fridge to Feed
b.
Frozen to Feed
c.
Thaw
4. Advance by pressing Enter or Confirm (green check)*
*Note that if a wrong entry was made, you may press the Go Back selection
button to go back a screen.
1. S
croll to choose the container type and size of interest.
2. Press Enter.
3. Only when ready to begin warming the feeding, place the feeding container
into the inner compartment (orange zipper) of the Therma-Liner and push it to the
bottom. Press firmly along the entire orange zipper to encompass the container as
much as possible. Use care when removing and re-inserting feeding containers to
prevent damage to the interior water compartment.
4. Place the prepared Therma-Liner in the well with the sealed opening at the top.
5. Press Enter*.
6. The device will begin warming, vibrating, and alternating screens between the
profile selected and elapsed time.
7. When the feeding has been warmed to a range that includes body temperature,
the device will enter
Ready to Feed mode
.
8. Please remove the feeding from the Therma-Liner and set the Therma-Liner
aside until next use during the shift.
9. Press On/Off to return the Penguin to
Standby mode
.
*Note that if a wrong entry was made, you may press the Cancel selection
button to go back a screen.
5. INSPECTING BEFORE OPERATION
6.1 WARM REFRIGERATED OR FROZEN FEEDINGS
