Pelltech PV50c, Руководство пользователя

Страница: 22 / 40

DK9802C2 PV50c user manual ENG Vers: C2 page22/38
Table 7 Main menu
Menu
nr
Sub menu
ENG
Description Default
settings
Options
1 STATUS-> Submenu with status and error
info
2 INFO-> Burner’s technical info
3 BURNER Turning burner ON/OFF OFF ON/OFF
4 HOLD FLAME Hold flame activated OFF ON/OFF/AUTO
5 PELLETS Fuel quality options NORM NORM/LIGHT/HEAVY
6 POWER Power level selection AUTO AUTO/20/26/32/38/44/50
7 BASE AIR Fan speed change at once for
all power levels 0 -2/-1/0/+1/+2/+3/+4/+5
8 LANGUAGE Language options ENG Annex 5 List of languages
9 PARAMETERS Parameters menu
STATUS
menu displays last events (burner states) and their duration. All durations are described in form
mm:ss (’m’ in the middle) or hh:mm (’h’ in the middle). Last row of the log shows current state. Last row
of the log shows burner’s current state. All burner’s statuses are described in Table 6 .
INFO menu displays main burner’s indicators like:

VER 4.91.18 7877 - Software version

U=13.6V - Battery voltage

I=0.2 A 1.2/0.1A - Feeder motor maximum/actual current

Tin=23
o
C - Burner input tube’s temperature

Tot= 6t 555.9kg - Total amount of pellets burnt in tons and kilos

Cnt= 5110.9kg - Pellets burnt since last counter reset in kilograms (resettable from INFO menu)

F=52/51±1 54/53 - Primary and secondary fan’s speed (Primary and secondary fan’s speeds (24 rps
of 25 set, ±1 added base air rotations, 33 rps of 35 set).

-2Pa 28% - Draught level and fluegas fan speed in percentage

P=26/32 kW - Actual/target power

T=0.0
o
C / TMP1 - External sensor’s temperature
Menu BURNER enables to turn burner safely ON or OFF.
The main idea of HOLD FLAME function is to reduce permanent ON-OFF cycles. This function is useful if
burner’s BURNING time is much longer than WAITING time. For an example 1 hour of BURNING time and
10 minutes of WAITING time. In HOLD FLAME state the burner work on 2kW power, its fan rotates slowly
(PAR10) and small quantities of fuel are added to burner.
If HOLD FLAME is switched ON from main menu the burner goes to HOLD FLAME always after BURNING
for time set in PAR11. If boilers working thermostat switches on before time set in PAR11, burner goes
back to BURNING state. If boiler working thermostat doesn’t switch on before time set in PAR11,
the
burner finishes burning with END BURN and END BLOW states. The length of HOLD FLAME can be
PRE-BURN 02m10
BURNING 03h:24