PELLA
®
INSYNCTIVE
™
BRIDGE PRODUCT GUIDE
|
13
To check or repeat fault codes, press and release BRIDGE
Test button twice. If there is currently an active fault, BRIDGE
will beep and orange light will flash as indicated in the
table on the previous page.
For example, if BRIDGE battery is low, the orange light
will turn on as BRIDGE beeps three times; light will turn
off and then turn on a second time.
The fault will then repeat two more times. If additional
faults are active, they will be added to the sequence and
will also repeat three times.
Once all fault codes have been displayed, BRIDGE will
go silent.
You can press and release the Test button twice to display
the faults again.
Once the fault condition has been corrected, BRIDGE will
automatically clear the fault.
SPECIAL FEATURES
(continued)
LIGHT
SYNC
BUTTON
TEST
BUTTON
