Qubino (Goap)
Qubino 3 phases Smart Meter
SKU: GOAEZMNHXD1
Quickstart
This is a secure Smart Meter for Europe. To run this device please connect it to your mains power supply. To add this device to your network
execute the following action:
Toggle the Service button S between 0.2 and 6 seconds
What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart
section. (For more information about frequency regulations please refer to
the frequency coverage overview at Sigma Designs Website
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication)
and every mains powered node can act as a repeater for other nodes (meshed network) in case the
receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-
Wave device regardless of brand and origin as long as both are suited for the same frequency
range.
If a device supports secure communication it will communicate with other devices secure as long as
this device provides the same or a higher level of security. Otherwise it will automatically turn into a
lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to
.
Product Description
The Qubino Smart Meter is an extremely versatile and powerful Z-Wave module for measuring energy in a single-phase electrical power network of up to
65A. A built-in microprocessor calculates energy, power and power factor from the measured signals. It is designed to be mounted on a DIN rail.
The Qubino Smart Meter can be used in residential, industrial and utility applications. It measures energy directly in 2-wire networks by means of fast
sampling of voltage and current signals. It calculates energy, power and power factor from the measured signals. You can control the module through the
Z-Wave network. It also acts as a repeater in order to improve the range and stability of the Z-Wave network. The Smart Meter is designed to be mounted
on a DIN rail.
Properties:
Z-Wave Plus
EU frequency: 868.42 MHz
Package content: 1x Qubino Smart Meter
Main terminals (LI,NI,Lo,No)
Contacts capacity: 1.5...16(25)mm
2
Connection screws: M5
