PELLA
®
INSYNCTIVE
™
BRIDGE PRODUCT GUIDE
|
12
FAULTS
BRIDGE monitors communication and battery status of synced
devices. A fault is an occurrence that interferes with the
regular operation and function of the device. If one of the
faults in the table below is detected:
• BRIDGE will beep and light will flash orange to display
a fault code to assist in troubleshooting.
• The fault code will repeat three times.
• BRIDGE will repeat the fault code every 15 minutes until
the fault is silenced or the fault is corrected.
• To silence the fault for 24 hours, press the Test button on
BRIDGE while the fault code is being displayed.
• The light will remain solid orange to indicate that a fault
still exists. The chimes will reoccur in 24 hours.
SPECIAL FEATURES
(continued)
FAULT
SENSOR Low Battery Fault
BRIDGE Low Battery Fault
Z-Wave Trouble
Supervisory Fault
CONDITION
A Pella
®
Insynctive
™
SENSOR
reports a low battery.
Battery in BRIDGE is low and
needs to be recharged or
replaced. Can be silenced by
pressing Test button.
BRIDGE sends several commands
to the Z-Wave home automation
system and receives no response.
SENSOR fails to report for
12 hours.
FAULT NOTIFICATION
Three beeps with one flash of
orange light
Three beeps with two flashes of
orange light
Three beeps with three flashes of
orange light
Three beeps with four flashes of
orange light
LIGHT
SYNC
BUTTON
TEST
BUTTON
