Pelgrim RSK595, Руководство пользователя

Страница: 14 / 29

27 26
Mounting the canopy hood
(RSK981/RSK990/RSK995/RSK999)
■ First determine the position and
distance with regard to the
mounting brackets. Mark the holes
that must be drilled and drill the
holes.
■ Fix brackets (A) to the wall with the
plugs and screws provided.
■ Screw the hood to the wall with the
plugs and screws (B) provided.
■ On the back of the canopy hood are
2 holes with a diameter of 8 mm for
the 2 plugs/ screws (C) to fix the
hood.
■
Connect the duct.
■ Fit the short cylinder to the
mounting bracket (A) and pull the
long cylinder to the top of the
canopy hood.
■ Screw the chimney in place from the
inside of the canopy hood (remove filters).
B
C
A
450
401
installation
Mounting the canopy hood (RSK986/RSK975)
■
First determine the position and
distance with regard to the
mounting brackets. Mark the holes
that must be drilled and drill the
holes.
■
Fix brackets (A) to the wall with the
plugs and screws provided.
■
Screw the hood to the wall with the
plugs and screws (B) provided.
■
On the back of the canopy hood are
2 holes with a diameter of 8 mm for
the 2 plugs/ screws (C) to fix the
hood.
■ Connect the duct.
■ Fit the short cylinder to the
mounting bracket (A) and pull the
long cylinder to the top of the
canopy hood.
■
Screw the chimney in place from the inside of the canopy hood (remove
filters).
Installation of the extractor hood can be simplified by removing the black filter
frame. To do so, unscrew the fastening screws. Once installation is complete,
the filter frame should be replaced.
B
C
A
The minimum free space beside
a cooking ring is 550 mm
(applies to these models only).