Installa on
and
Opera ng
Manual
Page
6
INSTALLATION
DOOR ADJUSTMENT
Minor adjustments to the door can be made by small alterations to the front levelling feet after the cabinet
has been secured. Further small adjustments to the door alignment can be made by slightly loosening the
lower hinge pin fixing bracket. The door can then be moved and held in the new position whilst re-fixing
the bracket. If adjusting the door using this method, do not completely remove the screws.
RESTORING THE DOOR SEALING GASKET
Ini ally
the
door
gasket
may
be
slightly
squashed
as
a
result
of
the
packaging
process.
This
will
normally
restore
to
full
fl
exibility
with
the
applica on
of
the
heat
generated
by
the
drying
cabinet.
Once
installed,
a
useful
p
to
speed
up
the
process
is
to
apply
heat
directly
from
a
hair
dryer
and
use
your
fi
ngers
to
tease
the
gasket
back
into
shape.
REVERSING THE DOOR OPENING
The
door
is
supplied
with
the
hinges
to
the
right
‐
hand
side,
as
standard.
Follow
the
instruc ons
to
reverse
the
opening,
if
required.
NOTE.
With care and assistance the above procedure can also be carried out with the
cabinet in the upright position, once the unit has been secured to the wall.
1.
Place the packaging material on the
floor to protect the cabinet, then
lay it down with the door uppermost.
2.
Remove the pivot pin from the lower
hinge (1) and lift off the door.
3.
Remove the lower plastic guide plug
on the unused hinge bracket and
refit to the opposite side.
4.
Unscrew the pivot pin from the upper
hinge (2) and re-fix to the opposite
side.
5.
Turn the door upside down and lo-
cate into the upper hinge pin; posi-
tion door on lower hinge bracket and
plastic guide, then screw in the lower
hinge pin with the washer between
the door and bracket.
