GB - 3
4511 FU-EP ST (Rev03_090219)
126348-02
Paul Hochköpper GmbH & Co. KG
Postfach 1727 • D-58467 Lüdenscheid • Tel.: +49 (0)2351 185-0 • Fax: +49 (0)2351 27666 • e-mail: [email protected] • Internet: www.peha.de
6.2.5 Function 5 (Time switch)
6.2.6 Function 6 (Fan control)
6.2.7 Function 7 (Light scenes)
Wall transmitter
Function
Press button I
Switch on with running time (parameter)
Press button O
Switch off
Parameter
1
2 min running time
2
1 min running time
3
5 min running time
4
10 min running time
5
20 min running time
6
30 min running time
7
60 min running time
8
120 min running time
Wall transmitter
Function
Press button I
Switch on delay (3 minutes)
Press button O
Activate delay time (parameter)
Parameter
1
6 min delay time
2
2 min delay time
3
10 min delay time
4
15 min delay time
5
20 min delay time
6
30 min delay time
6.3
Window contact and window handle
Notes:
– The assignment and programming of a window contact is also possible
before the installation.
– Control of the receiver with window contacts and window handles
(beginning with Version 1.1).
6.3.1
Function 8 (Switch on/off)
6.3.2
Function 9 (Switch off/on)
7. Troubleshooting & remedies
7.1
New system or existing system
•
Check power supply (electrician only).
•
Check connected electrical loads.
•
Check the system’s surroundings for changes that could cause interference
(e.g. metal cabinets, furniture or walls which have been moved).
•
If the transmitter/receiver operates at a reduced distance, the radio signal was
encountering interference or it was operating outside the transmission range.
•
Use the receiver at a better location.
•
Delete all transmitters and reprogram the receiver.
7.2
Receiver switches by itself
•
This may be caused by operation of an external transmitter that was coincidentally
assigned to the receiver.
•
Delete all transmitters and reprogram the receiver.
7.3
Radio signal range limitations
•
Use of the receiver in the vicinity of metal objects or materials with metal
components. Maintain a distance of at least 10 cm.
•
Moist materials.
•
Devices which emit high-frequency signals (e.g. audioand video systems, compu-
ters, electronic ballasts in light fixtures). Maintain a distance of at least 0.5 m.
7.4
Contact
Telephone:................ +49 (0)2351 185-0
Fax:.......................... +49 (0)2351 27666
Internet:.................... www.peha.de/contact.aspx
E-mail:...................... [email protected]
Wall transmitter
Function (parameter)
Press button O briefly
Switch on light scene A/C
Press button O long
Store light scene A/C
Press button I briefly
Switch on light scene B/D
Press button I long
Store light scene B/D
Parameter
1
button O = light scene A, button I = light scene B
2
button O = light scene C, button I = light scene D
Magnet
max. 5mm
PEHA Window contact
(450 FU FK)
Application example: fan control
Realisation of illumination with fan control by using two Easyclick receivers (4511
FU-EP ST)
and one transmitter. The first receiver is used for fan control and the
second for light control.
Programming
• Assign the transmitter to the first receiver
(fan control), program function 6
and set parameter.
•
Assign the transmitter to the second receiver (light control) and program
function 1.
Fan control operation
•
Button I will switch the light on. The fan will switch on after a time delay of
3 minutes.
•
Button O will switch the light off. The fan will be switched off after expiration
of the running time.
Application example: light scene
A light scene can be adjusted by using a transmitter and an available light control
(various receivers with assigned transmitters).
Programming
Assign the transmitter to each receiver, program function 7
and set parameter.
Store light scene (A-D)
•
Switch on the required light scene (receivers).
•
Press button I or O of the transmitter for longer than 2s.
As a confirmation,
the lighting switches off and on.
Select light scene (A-D)
Press briefly the button I or O of the transmitter.
Learn mode
•
Assign / delete window contact with its program button.
•
Assign / delete window handle by opening / closing.
Function programming
(transmitter detection)
•
Activate the window contact once with the magnet.
•
Open or close the window handle once.
Function setting
(e.g. function 8)
LRN/SET button 8
x activated
LED blinks 8 x orange
function 3
Parameter
setting
(e.g. parameter 2)
LRN/SET button
2
x activated
LED blinks 2 x green
parameter 2
Window contact, window handle
Function
Window contact or handle – opened
Switch on
All window contacts and handles – closed
Switch off
Parameter
1
Window contact function
2
Window handle function
Window contact, window handle
Function
Window contact or handle – opened
Switch off
All window contacts and handles – closed
Switch on
Parameter
1
Window contact function
2
Window handle function
