Pegasus PP-3702/T Series, Руководство по эксплуатации

Страница: 43 / 44

39
correct and solid reliable by viewing the terminal response from
each reader.
A.2—If the supported PC standard software package for polling mode
and through the multi-channel controller PCP-832-xx can set the
system time and date, but cannot collect the stored or immediate
data, then please check if the Data Terminal Ready (PIN G) is
correctly connected with PIN 4 (Non-inverted Data Terminal
Ready). At polling mode, if the real time data is ready or the
buffer is not empty, then the PIN G should be at low voltage level
less than 2.5 VDC. If at above condition but the voltage level is
higher than 2.5 VDC at any side, please check if the wiring is
correct.
#Symptom 02: The Personal Computer can not collect the data string
through the linking driver in Clipper
A.1—Please check if the parameters of on-line (Such as 88aa and 890t
of F4) are well programmed.
A.2—Please check if the reader is connected at COMM1.
A.3—Please check if EMM386.EXE in file of CONFIG.SYS is
remarked and whether FILE/BUFFERS is opened as stipulated as
rem device=C:\windows\EMM386 I=e000-efff noems
A.4—Check whether the delay time in software is matched with
executing time in the reader. Please adjust the delay time.
(It’s better to turn off the TURBO function).
A.5—Please check whether TSR subroutine such as for MOUSE driving,
FAX modem or Virus detecting program is standing in the memory.
Please get rid of them if they exist in the memory.