yellow
Power
source
To the machine motor
control board connector
(optional)
orange
7
6
5
1
3
4
2
8
2.
Fasten the cords on the underside of the table conveniently with the provided cord clamp.
blue
white
Earth wire
To use AI110
The connector is different in
color according to the motor.
To the machine
motor power
connector
white
white
white
white
white
orange
orange
blue
blue
●
To disconnect the locking connector, hold down the locking
mechanism
8
with finger as you pull the connector out.
Connecting cords
W
W
ARNING
ARNING
Always turn off the power, unplug the machine from
the outlet and then only well-qualified technicians should
connect the cords.
Check the voltage designation
7
to make sure the
power relay cord
1
matches the local supply voltage. The
use of wrong cord may cause damage to parts and/or fire.
1.
Each of cords and connectors is color- and shape-
coded. Connect the cords to the connectors correctly
as shown below.
Connect the earth wire correctly. Otherwise you may
get an electric shock when you touch the AI power box
and/or the machine.
Failure to connect properly may cause hazardous
faulty operations and damage to the machine.
To connect the power relay cord
1
to the push-button
switch
2
, connect E marked (green/yellow striped) wire
to the GND terminal
3
.
The other two cords must be connected to any 2 of the
terminals
4
,
5
, and
6
.
