8 of 13
ISSUED: 04-24-08 SHEET #: 055-9256-9 11-21-11
Installing Inner Channel and Routing Cables
3
NOTE:
Be certain holes on inner channel (
CC
) face in the same direction of opening on outer channel (
BB
).
NOTE:
Cables must be removed from projector before routing through channels. If cables are not removable from
projector, routing through channels is not an option.
Guide projector cables into openings in channels then insert inner channel (
CC
) into outer channel (
BB
) as shown
in fi gure 3.1 or 3.3.
Position inner channel (
CC
) to the desired extended position and secure using two M6 x 12 mm socket pin
screws (
HH
) through clamp plate (
DD
) and into inner channel (
CC
) as shown in fi gure 3.2 or 3.4.
CEILING INSTALLATION
WALL INSTALLATION
(EXCEPT FOR PRS-EXC MODELS)
O P E N I N G
HOLES
BB
CC
fi g. 3.4
fi g. 3.3
HH
DD
BB
CC
O P E N I N G
BB
CC
HOLES
GUIDE
CABLES IN
CHANNELS
fi g. 3.1
fi g. 3.2
HH
DD
BB
CC
