manualshive.com logo in svg

Peavey 03620490, Руководство пользователя

Поделиться
Скачать
Peavey 03620490 Скачать руководство пользователя страница 42

Loudspeaker System Specifications 

40 

The system power amplifiers shall have an unfiltered frequency response of 20 
Hz to 20 kHz which deviates no more than +0, -3 dB up to rated power, hum and 
noise better than 90 dB below rated power, and THD and IMD of less than 0.5%.  
The woofer amplifier shall be capable of 375W sine wave power output into a 4 
ohm nominal load, and the tweeter amplifier shall be capable of 50W sine wave 
power output into a 8 ohm nominal load, before compression and limiting 
engage, and both shall incorporate independent DSP controlled signal 
compression. 
The input signal shall be electronically divided into high frequencies and low 
frequencies by a fourth order slope line-level crossover at 1.8 kHz. The low 
frequencies shall be processed to provide bass boost, subsonic filtering and 
overall response shaping, and the high frequencies shall be equalized for 
response-shaping. 
The enclosure shall be constructed of injection-molded plastic with a UL flame 
rating, and reinforcing ribs internally.  A handgrip shall be incorporated on each 
side near the woofer and towards the front, and on the right side of the cabinet.  
A separate powder-coated metal grille shall be provided for horn and woofer 
protection. The cabinet shall incorporate a pole mount for speaker stand use, 
four tall sturdy rubber feet for floor standing use, and a group of four mounting 
point inserts on the top and bottom each, and on the right side, for flying use. 
The outside dimensions shall be: 28.2

5” (71.8 cm) tall x 18.90” (48.0 cm) wide x 

18.71

” (47.5 cm) deep, and the weight shall be 50 lbs. (22.7 kg).  Power 

requirements shall be: 150 Watts nominal, 100-120 VAC, 50/60 Hz Domestic and 
220-240 VAC, 50/60 Hz (Export). The loudspeaker system shall be called a 
Peavey 

PVX™p 15 Bluetooth®. 

 
 

GENERAL SPECIFICATIONS 

 

Frequency Range

, 1 meter on-axis, swept-sine in ½ Space environment: 

53 Hz to 20 kHz 

 

 

Frequency Response, 1 meter on-axis, swept-sine in anechoic 
environment: 

59 Hz to 20 kHz (±3 dB) 
 

Usable Low Frequency limit 

(-10 dB point anechoic):

 

52 Hz 
 

 

Nominal sensitivity 

(1W @1M, swept sine input in anechoic environment):

 

97  dB (average) 
 

Maximum Sound Pressure Level (1 meter): 

127 dB SPL peak with music 
 

Radiation Angle measured at -6 dB point of polar response: 

Содержание 03620490














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды