manualshive.com logo in svg

Peavey 03620490, Руководство пользователя

Поделиться
Скачать
Peavey 03620490 Скачать руководство пользователя страница 10

Loudspeaker System Specifications 

8 

 DO NOT connect the inputs of the 

PVX™p 15 Bluetooth® to the output of 

a power amplifier. The inputs are meant to be driven from a line-level strength 
signal. 
 
DO NOT remove the protective metal grilles. 
 

WARNING!

 The 

PVX™p 15 Bluetooth® is very efficient and powerful! This 

sound system can permanently damage hearing!  Use extreme care setting the 
overall maximum loudness! 
 
The apparent sound level of the 

PVX™p 15 Bluetooth® can be deceiving due to 

its clear, clean sound output. The lack of distortion or obvious distress can make 
the sound level seem much lower than it actually is. This system is capable of 
SPL in excess of 127 dB at 1 M from the speaker! 
 

Flying the PVXp™15 

IMPORTANT SAFETY INFORMATION FOR THE MOUNTING AND FLYING OF 
THE PEAVEY 

PVX™p 15 

 

 

CAUTION:  Before attempting to suspend this speaker, consult a certified 
structural engineer.  Speaker can fall from improper suspension, resulting in 
serious injury and property damage.  Other enclosures may NOT be suspended 
below one, nor should additional weight be suspended from one of these units.  
Use only the correct mating hardware.  All associated rigging is the responsibility 
of others. 
 
Maximum enclosure angle from vertical hang is 30 degrees. 
 
Always use a suitable safety chain or wire rope, attached to an unused group of 
fly points or to the cabinet as directed by a certified structural engineer, and firmly 
attached to a suitable structural member as indicated by a certified structural 
engineer. 
 
The recommended range of torque for the mounting bolts is 3.5 to 4.0 foot-lbs.  
(4.75 to 5.42 N-m).  

DO NOT OVERTIGHTEN !

  If an insert spins free, it has 

been damaged, and the cabinet can not be safely flown from that set of inserts! 
 
Never transport the cabinet while mounted on an array bracket or other mounting 
bracket, this may unduly stress the mounting inserts. 
 
The use of threadlocker (blue type/medium strength) on the mounting bolts is 
recommended, as are the appropriate lockwashers, to insure that the mounting 
hardware will not vibrate loose over time. 

Содержание 03620490














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды