PeakTech 5400, Руководство по эксплуатации

Страница: 25 / 40

4. Functions
4.1. IR Measure
The IR measurement mode is useful for quick and easy data acquisition.
Press the Trigger-key to power on the instrument and start the
measurement. The display shows measuring values of infrared
temperature, air temperature (AT), relative humidity (RH) and dew point
temperature (DP).
If measurements are completed, press the Trigger-key again to turn off
the instrument.
Note:
For more information on temperature measurement using infrared beam,
we have prepared in Chapter 5.
4.2. LED for good-bad-evaluation
Above the display is a LED positioned that can light up while during the
measurement in three different colors:
-
If the LED is green, there is no risk of mold growth.
- If the LED is yellow, there is an increased risk of mold formation.
- If the LED is red, there is acute danger of mold growth or the
measurement area is already infested with mold.
Note:
The yellow LED lights, so in addition a warning beep.
The red LED lights, so you will hear a continuous beep.
-24-