1. On the PC, start the Windows program “Flash Magic”.
2. On the
Device
panel, click
Change
and select
LPC54000
>
UART
>
LPC54618J512
.
3. Select the RS-232 interface used on the PC at
Serial Port
and set the
Baudrate
to
57600
.
4. On the
Erase
panel, select
Sectors used by file
from the drop-down list.
5. On the
Options
panel, enable
Verify after Programming
.
6. On the
Firmware
panel, specify the wanted firmware file (
*.hex
), either by
typing or via
Browse
.
7. Click
Start
for the firmware update.
8. When the update process is
Finished
(corresponding message), quit the Flash
Magic program and restart the MicroMod FD (for example with the blue Reset
button).
4 Firmware Update of the PCAN-MicroMod FD
PCAN-MicroMod FD Evaluation Board
User Manual 1.1.0
© 2020 PEAK-System Technik GmbH
27
