Screw terminals for digital inputs with associated DIP switches and LEDs
The inputs each have a pull-down resistor and are High-active. The switching
thresholds are below 2.2 V to the Low state and above 3.3 V to the High state. Each
input status is indicated by an LED.
For test purposes, the individual input signals can be switched via the DIP switches
S300. A DIP switch activates a pull-up resistor with 2.7 kΩ to the 5-Volts supply. If it is
permanently activated, a low-active signal can be used on the input via the screw
terminal (e.g. push button connected to ground).
Signals that directly lead to the MicroMod FD can be accessed on the following points
of the field J2B:
Pin on J2B Processed input signal (inverted)
31
Di0
33
Di1
35
Di2
37
Di3
39
Di4
41
Di5
43
Di6
45
Di7
3 Components of the Evaluation Board
PCAN-MicroMod FD Evaluation Board
User Manual 1.1.0
© 2020 PEAK-System Technik GmbH
17
