Peak IPEH-004020 Скачать руководство пользователя

Страница: 44 / 73

PCAN-Wireless Gateway – User Manual

In Expert mode, (See chapter 5.6.2

)

further detailed information is displayed.

CAN Channel Configuration:

Each channel is handled and configured by a separate form.
Settings can be saved by clicking the Save Settings button located
underneath the form.

Activate / Deactivate:

(Expert mode only) Use the Checkbox to

activate or deactivate the CAN channel.

Bit Rate Selection:

For setting the bit rate, click the drop-down

menu and select the value that is used on the connected CAN bus.

Custom Bit Rate:

(Expert mode only) By clicking on this checkbox, a

form for configuring a custom transmission rate can be opened. For
details, see the following section

Configuring Custom Bit Rates

Listen-Only-Mode:

If the PCAN-Gateway should act as a pure

observer, not affecting the data traffic, Listen-Only-Mode must be
enabled. Activate Listen-Only-Mode with a click on the checkbox.

User Notes:

Additional information with a length of 125 characters

can be entered for each CAN channel. This text is available while
route creation or editing.

Содержание IPEH-004020










































































Результаты поиска

Содержание IPEH-004020

Отзывы:

Похожие инструкции для IPEH-004020

Бренды по названию

Популярные бренды

Peak IPEH-004020, Руководство пользователя

Результаты поиска

Содержание IPEH-004020

Отзывы:

Похожие инструкции для IPEH-004020

Бренды по названию

Популярные бренды