Model
AWM125-120 ARTICULATING WALL MOUNT INSTRUCTIONS
Thank you for purchasing the
PDR
mount.
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight
display and the wall mount.
Always use at least two persons for all installations.
Fully tighten all of the mounting screws as specified in the installation instructions.
Features
Special techniques are necessary for installation of the panel display mount.
Do not attempt to perform this work by yourself.
Request an installation specialist to install this unit.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for t
mounting unit left on the wall. Also note that long use of the panel display may discolor the wall around it due to its heat a
airflow.
1
Fig 1
All PDR mounts and adapters carry a limited lifetime warranty against defects in material and workmanship. We are not liable
for improper installation that results in damage to mounts, adapters or presentation equipment.
To register visit our web site @ www.pdrmounts.com
Mounts by
A division of David Engineering & Mfg. Inc.
for future reference.
of both the panel
he
nd
R
R
R
R
R
R
R
R
R
R
R
Simple to adjust
Adapter plate included
125 lb rated
AWM 125-120 FITS 22” TO 36” DISPLAYS
Rugged heavy gauge metal construction
Tough powder-coated finish
Extends 20.7” from the wall and closes to under 4.6”
Pivots left or right, tilts up 5 deg. and down 15 deg.
3 adjustable height positions
Includes cable management system
Tension bolts to adjust smooth action and eliminate creep
