A Leader in Patient
Communication Solutions™
MODEL NUMBER:
SW43LED DVB-T LED TV’S
Document Number:
PD196-350R2
User Manual
Page 10 of 29
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1.800.628.9870 FX 1.937.743.5664
Pillow speaker
A ¼” (6.35mm) stereo-style pillow speaker (pendant control) jack is located on the TV’s connector panel on the backside.
This TV is designed to work with a digital pillow speaker that generates digital-style control codes. A rear panel mounted
switch allows use of different brands of pillow speakers and supports the major brands.
Warning:
DO NOT connect the pillow speaker circuit Common to earth ground. Grounding of the Common
will defeat the isolation circuitry of the TV and possibly expose the patient to harmful shock currents should a
wiring fault occur.
Caution:
Confirm the pillow speaker type and set the bottom switch appropriately BEFORE connecting the
pillow speaker to the TV. Failure to follow this procedure could result in damage to the pillow speaker and/or
TV. The switch on the back of the TV will be CR (-5V), OFF, CP (+5V), and CZ (+12V).
Across Room Wiring
Note: A Jumper Cable is NOT supplied with the TV and must be ordered separately. PD106-416 and PD106-417 shown.
Caution:
Some hospital cable systems provide power voltage on the coaxial cable. This TV is NOT designed
to be powered via a coaxial cable. DO NOT connect to a powered coaxial cable. Damage will result to the TV.
6.35mm to 6.35mm
Jumper Cable PD106-417
6.35mm to 6-Pin Jumper
Cable PD106-416
