A Leader in Patient
Communication Solutions™
MODEL NUMBER:
SW43LED DVB-T LED TV’S
Document Number:
PD196-350R2
User Manual
Page 11 of 29
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1.800.628.9870 FX 1.937.743.5664
Television Setup
The following instructions assume you have correctly mounted the TV and connected an RF coax cable signal.
Note:
To enter TV menu screens, you must press “OK” then 9090
to access. Press ► to highlight desired menu
and ▼ to enter. Pressing “EXIT” will take you to previous screen.
Channel Menu
Service Levels Setup
This TV contains a Disable and three separate Service Levels; Free, Basic, and Premium. Only one Service Level is
usable at a time.
Active Service Level
Disabled
– This is like a mechanical key lock – when in
Disabled
Service Level, the TV can be turned off and on, but it
cannot be used for viewing. A standard message appears on a black screen.
Free
– This lets patients watch hospital education and information channels without renting the TV. The channels
containing programming for no charge are typically programmed into this level of service. This is the factory default
setting for Service Level.
Basic
– This service level typically allows additional channels beyond those offered in the FREE level.
Premium
– This is the highest service level with typically the most channels available for viewing.
1. In “Channel” screen,
press ▼ to highlight “Service Level”.
2. Press “OK” to take you to next screen and
► to select desired service level. Once desired service level is shown
it automatically saves and you may exit the screen.
