10
Document Number: PD196-124 Rev 1
Control
Rear Panel
1 AC INPUT
AC power cord connection.
2 AV IN
Connect these outputs to the Audio/Video
inputs of external equipment.
3 S-VIDEO IN
Connect the output of an S -VIDEO VCR to the
S-VIDEO input.
4 COMPONENT2 IN
Connect the COMPONENT2 audio/video
output sockets of the DVD to the
COMPONENT audio/video input sockets of
the set.
5 COMPONENT1 IN
Connect the COMPONENT1 audio/video
output sockets of the DVD to the
COMPONENT audio/video input sockets of
the set.
6 ANT
Connection to Cable TV Coax.
7 SVC
Service port.
8 PC ANALOG IN (D-SUB)
Connection to the video output jack on your
PC.
9 SPDIF
Provides a digital audio output signal for
connection to an external digital audio device.
10 AUDIO OUT
Connection for external audio amplifier or
speakers.
11 HDMI1 IN
Connection for HDMI device.
12 HDMI2 IN
Connection for HDMI device.
13 USB PORT
Firmware upgrading purpose.
14 MTI
15 CCI
16 PILLOW
Pillow speaker port.
Use the switch to select correct voltage.
CZ : Zenith Compatible (+14V)
CP : Philips Compatible (+5V)
CR : RCA Compatible (-5V)
Off : Pillow port disable (0V)
! CAUTION !
Moving this switch changes
the voltage supplied to the
pillow speaker.
Make sure it is set correctly
BEFORE
plugging in the
pillow speaker jumper cable.
Failure to do so WILL
RESULT IN THE PILLOW
SPEAKER BEING
OVERDRIVEN AND
POSSIBLE DAMAGE TO
THE PILLOW SPEAKER.
