45
Document Number: PD196-124 Rev 1
Features
Power Management
The TV will automatically power off after a specific
period of viewer inactivity providing energy
savings.
1. In Features
menu, press the CH
▲
/ CH
▼
button to select Power Management.
2.
Press the
VOL
◄
/ VOL
►
button to determine
active time. Set to Disabled to disable this
feature.
3.
Press the SETUP
button to return to the
preceding menu.
NOTE: Auto Power On must be set to Disabled
for this function to operate.
Bed A/B
The TV can be controlled using a patient IR
remote control part number PD108-421. This
feature setting selects which IR remote control to
recognize – bed A remote or bed B remote.
1. In Features
menu, press the CH
▲
/ CH
▼
button to select Bed A/B.
2.
Press the
VOL
◄
/ VOL
►
button to select
remote control
A
or
B
.
3.
Press the SETUP
button to return to the
preceding menu.
NOTE: The patient remote’s bed codes are set by
press a paper clip or pencil tip end into the code
hole located above the “CODE” label on the
remote.
Caption Text Modes
Teletext can be displayed in addition to Captions.
Teletext is not normally broadcast in the USA.
Caption Text Modes should be set to Disabled for
televisions operated in the USA.
1. In Features menu, press the CH
▲
/ CH
▼
button to select Caption Text Modes.
2. Press the VOL
◄
/ VOL
►
button to select
Disabled or Enabled.
3. Press the SETUP
button to return to the
preceding menu.
