19
Document Number: PD196-124 Rev 1
Connections
1.
Use an audio cable to connect the television’s AUDIO OUT jacks to the external devices input
jack.
2. Activate the device.
AUDIO OUT
Audio from the current selected device can be outputted to an amplifier, external speakers, or
other similar device.
Zenith is a trademark of the Zenith Electronics Corporation, All Rights Reserved.
Philips is a trademark of Koninklijke Philips N.V. All rights Reserved.
RCA is a trademark of the RCA Corporation. All Rights Reserved.
1. Select the appropriate brand of digital pillow speaker using the recess slide switch next
to the PILLOW jack.
CZ for Zenith
©
CP for Philips
©
CR for RCA
©
OFF to disable the pillow speaker
For analog style pillow speakers set the switch to either CZ, CP, or CR.
NOTE: The TV is shipped from the factory with the switch in the OFF position.
CAUTION:
Confirm pillow speaker type and set the slide switch
appropriately BEFORE connection the pillow speaker to the TV.
Failure to follow this procedure could result in damage to the pillow
speaker and / or TV.
2. Connect the pillow speaker to the PILLOW jack.
3. Operate the pillow speaker and verify correct control.
Pillow Speaker
The pillow speaker (pendant control) jack is located on the TV’s connector panel. Control of the TV
using an externally wired pillow speaker is possible. Please see the “Installation” section elsewhere
in this manual for wiring details.
