TRANSMITTER OPERATIONS
Transmitter Start-Up
1.
Ensure the Laser Power Switch on the front panel is set in the OFF position.
2.
Turn on the unit power using the ON/OFF switch on the rear panel.
The green lighted POWER LED on the front panel will illuminate.
3.
Turn the Laser Power Switch to the ON position. The LCD display will, now,
indicate “Laser ON”.
4.
Note: If the unit is functioning properly, the ALARM Display light will remain
unlit. A red light illumination of the ALARM Display indicates the transmitter
is malfunctioning.
RF Connection
Confirm the RF input power is set to the correct level. Note: Incorrect RF
input will cause noise and distortion performance of the transmitter.
RF Input
1.
Connect RF power input interface at the RF port on the rear panel.
2.
Connect RF monitoring device to the RF TEST PORT on the front panel.
Note: RF TEST PORT signals will be 20 dB below R F Input signals.
Page 8
All manuals and user guides at all-guides.com
