PCT PCT-FTX3R Скачать руководство пользователя страница 2

1715 West Sunrise Boulevard

Gilbert, Arizona 85233

Toll Free: 800.315.2253

Phone: 480.813.0925

Fax: 480.892.5537

www.pctusa.net

 

Product Operations Manual

 

Model

 

PCT-FTX3R

CATV 1310nm DFB

Fiber Optic Transmitter

STATEMENT OF WARRANTY

PCT-International, Inc. warrants this product to be free of defects in workmanship, materials, and 
manufacture for a period of one (1) year from date of purchase. Further, PCT-International, Inc. will repair 
and/or replace this product or its components that have been proven defective during the warranted period 
of one (1) year. This warranty shall not apply to product(s) which has had the factory seal broken, or has 
been subjected to misuse, neglect, accidental damage, incorrect wiring, improper installation, or use in 
violation of authorized instructions. Removal of the product's nameplate, bearing model number and serial 
number, shall also void this warranty coverage. Warranty shall not be enlarged, diminished, or affected by, 
nor shall further obligation or liability arise from PCT-International, Inc.'s rendering of technical advice or 
service in connection with the purchaser's order for this product.

This manual contains information, illustrations, and technical data that pertain to the operation of model PCT-FTX3R, 
CATV 1310nm DFB fiber optic transmitter. Pursuant to sections of Title 21, United States Code of Federal Regulation 
(CFR), Chapter I, Subchapter J, and administered by the Center for Devices and Radiological Health (CD RH), 
operating under the Food and Drug Administration (FDA), this product which produces or receives an optical signal 
composed of laser radiation, complies with 21 CFR Chapter I, Subchapter J, as applicable to Class I laser products.

DANGER

 - 

AVOID DIRECT EXPOSURE TO THE LASER BEAM AT ALL TIMES.

 Invisible 

radiation continues when open or when operating with fiber optic cable disconnected. Never operate 
unit with a broken fiber or with a disconnected and/or unterminated fiber connector.

!

CAUTION 

-There are no user-serviceable parts inside the unit. Refer all servicing to qualified service 

personnel. Make no attempt to modify or alter any circuit or component assembly, other than those 
measurements, adjustments, and tests specified in this manual. Unauthorized modifications to this unit 
will result in nullification of warranty coverage.

!

Page 2

VER 2 - 06282005

All manuals and user guides at all-guides.com

Содержание PCT-FTX3R
















Отзывы: